cn|en
Your location: Home -> News Center -> Industry Dynamics

Chemical Purification Equipment Selection: What Continuous Distillation Processes Are Compatible Wit

Source:www.cnxinshiji.net      Release date: 2026-11-12
In chemical production, various working conditions exist in the material separation and purification stage. Some materials tend to deteriorate upon heating, while others feature high viscosity. Conventional evaporation equipment is prone to coking on the wall surface during processing, disrupting the continuous operation of the entire production line. The WFE wiped film evaporator belongs to the e

      In chemical production, various working conditions exist in the material separation and purification stage. Some materials tend to deteriorate upon heating, while others feature high viscosity. Conventional evaporation equipment is prone to coking on the wall surface during processing, disrupting the continuous operation of the entire production line. The WFE wiped film evaporator belongs to the evaporation and distillation equipment series. It realizes heat exchange and evaporation by forming a thin liquid film of materials on the heating surface, shortening the heating duration of materials. It can be integrated into multiple continuous distillation processes and applied in production sites across various industries.

      For the solvent removal process of heat-sensitive materials, the WFE wiped film evaporator supports continuous distillation. Many pharmaceutical intermediates and natural extracts will change properties if exposed to high temperatures for an extended period. Traditional kettle evaporators feature long heating cycles, which easily cause material loss. The rotor system of the WFE wiped film evaporator evenly spreads materials onto the inner wall of the cylinder to form a thin liquid film. This expands the contact area between the heating surface and materials, enabling rapid evaporation and shortening high-temperature exposure time. The equipment allows continuous feeding and discharging to sustain an uninterrupted distillation process. It is suitable for various production procedures requiring solvent removal at low temperatures and reduces property changes caused by material heating.

      In the concentration and distillation of high-viscosity materials, the WFE wiped film evaporator can handle feed liquids with poor fluidity. When material viscosity rises, materials tend to accumulate inside ordinary evaporators, forming deposits on heat exchange surfaces, lowering heat transfer efficiency and requiring shutdown for cleaning. The built-in wiped-film rotor continuously agitates the feed liquid to maintain fluidity of the liquid film, reducing material adhesion on the cylinder wall and keeping the heat exchange surface effective. The equipment can stably process materials of different viscosity ranges in continuous distillation workflows. It adapts to concentration and solvent separation procedures for resins, oils and similar materials, cutting the frequency of shutdown cleaning and maintaining continuous production.

      For continuous distillation in solvent recovery, the WFE wiped film evaporator is applicable to separation and recovery of organic solvents. Chemical production generates feed liquids containing organic solvents, which need to be separated and recycled for reuse to reduce raw material consumption. After feed liquid enters the equipment, vaporized solvent steam rises for separation and is collected in the subsequent condensation unit, while concentrated residual liquid is continuously discharged from the bottom. The whole process runs non-stop. It is compatible with the recovery of various solvents such as ethanol and ethyl acetate. The separated and collected solvents can be reused in production and lower the investment for waste liquid disposal.

      For light component removal of multi-component materials, the WFE wiped film evaporator can be used as a front-end light removal unit integrated into the complete distillation production line. Many mixed materials contain low-boiling light impurities that need to be removed in advance before entering subsequent rectification. When the WFE wiped film evaporator is installed at the front of the rectification system, light components are vaporized and separated via continuous evaporation, and the remaining heavy-phase materials are continuously conveyed to the next process, reducing the processing load of the rear rectification equipment. This configuration simplifies the overall separation workflow, adapts to pre-treatment procedures of multi-component mixed materials and fits the process layout of continuous production lines.

      For continuous evaporation of coking-prone materials, the dynamic wiped-film structure of the WFE wiped film evaporator mitigates wall adhesion. During evaporation, certain materials precipitate substances that stick to the heated inner wall and form scale, hindering heat transfer. The rotor continuously renews the liquid film on the cylinder wall to reduce solid deposition and extend continuous production time. The cylinder body can be manufactured from different materials to handle corrosive feed liquids, with structural adjustments made according to working conditions to meet continuous distillation requirements under diverse corrosive environments.

      The equipment adopts an overall modular structure, which facilitates combination with feed pumps, condensers, receiving tanks and other devices to build continuous distillation production lines. Equipment specifications can be adjusted according to throughput to match production scales ranging from lab-scale tests to industrial mass production. A vacuum system can be equipped during operation to lower the boiling point of the system and realize evaporation and distillation at relatively low temperatures, expanding the range of processable materials. In revamping and new construction of continuous purification production lines in chemical engineering, bio-extraction, oil processing and other industries, the WFE wiped film evaporator can be incorporated into the full distillation workflow to accomplish material evaporation and separation.

+ WeChat number:WEIXINHAOMA

Add WeChat friends to learn more about the product.